Quantity:
Chrome Plated Brass with O-ring retention groove Detailed Description O-ring retention groove in the hex that will keep the o-ring in place when tightening which will prevent the o-ring from squeezing out to ensure a perfect seal. The barb end is also slightly increased which gives the option of eliminating hose clamps.Features:Bright Polished Chrome Plated Brass Smooth bore, Beveled edges for optimal fluid transfer O-ring retention groove for a perfect seal Oversized barb end can eliminate the need for hose clamps Comes with O-ring installedSpecifications:Barb Size OD: 1/2" (14.5mm at largest point) Barb Size ID: 10mm (.40") Thread Size: G-1/4" Material: Chrome Plated Brass Thread Length: 4.5mm (.18") Total Length: 30mm (1.18") Recommended Tubing: 1/2" ID or 7/16" ID
Chrome Plated Brass with O-ring retention grooveDetailed Description O-ring retention groove in the hex that will keep the o-ring in place when tightening which will prevent the o-ring from squeezing out to ensure a perfect seal. The barb end is also slightly increased which gives the option of eliminating hose clamps.Features:Bright Polished Chrome Plated Brass Smooth bore, Beveled edges for optimal fluid transfer O-ring retention groove for a perfect seal Oversized barb end can eliminate the need for hose clamps Comes with O-ring installedSpecifications:Barb Size OD: 3/8" (11.2mm at largest point) Barb Size ID: 7.9mm (.31") Thread Size: G-1/4" Material: Chrome Plated Brass Thread Length: 4.5mm (.18") Total Length: 30mm (1.18") Recommended Tubing: 3/8" ID
New Product from Danger DenUse this fitting to install Tri-SLI or Quad-SLI. Designed with a G 1/4 BSPP straight thread.For tight installation of various SLI configurations (or Crossfire) this fitting is the perfect match!Features:Large Bore 0.400" (10.1mm) for 1/2" fittings Larger diameter O-Ring to help seal parts with a minor countersink Pricing is per each fitting Caution:This Micro Stubby fitting is...very short. Care must be taken to ensure the tubing is sealed. The fitting is designed after the Perfect Seal fittings but a clamp must be used.
New Product from Danger DenThe FB (Fat Boy) Fittings from Danger Den are now the most reliable and universal fitting to date. The FB Fitting integrates an O-Ring capture to seal. Large ID bore for high flow and lower pressure drop compared to other fittings. Designed with a G 1/4 BSPP straight thread.The FB (Fat Boy) Fittings from Danger Den are now the most reliable and universal fitting to date. The FB Fitting integrates an O-Ring capture to seal. Large ID bore for high flow and lower pressure drop compared to other fittings. Designed with a G 1/4 BSPP straight thread.Features:Large Bore 0.400" (10.1mm) for 1/2" fittings and 0.335" (8.5mm) for 3/8" Fittings O-Ring capture to prevent overtightening and/or damaging the O-Ring Larger diameter O-Ring to help seal parts with a minor countersink Pricing is per each fitting.
Danger Den replacement Hi-Flow chrome fittings with 1/2" hose tail can be used with most new Danger Den Hi-Flow Blocks including TDX, Maze4 CPU and GPU and also all Danger Den Reservoirs with G1/4" thread.For more information on Barbs and Fittings please see our Barb Sizes Explained Guide
Danger Den replacement Hi-Flow chrome fittings with 3/8" hose tail can be used with most older Danger Den Hi-Flow Blocks including TDX, Maze4 CPU and GPU and also all Danger Den Reservoirs with G1/4 thread.For more information on Barbs and Fittings please see our Barb Sizes Explained Guide
Danger Den Stubby Barb is shorter in length and used for linking Sli NV-68/78/79 Blocks or can be used as a conventional stubby barb where routing of hose and/or space is an issue. For more information on Barbs and Fittings please see our Barb Sizes Explained Guide
Danger Den replacement Perfect Seal chrome fittings with 1/2" hose tail can be used with most new Danger Den Blocks including TDX, Maze4 CPU and GPU and also most European products using G1/4 threads.For more information on Barbs and Fittings please see our Barb Sizes Explained Guide
Danger Den replacement Hi-Flow chrome fittings with 1/2" hose tail can be used with most older Danger Den Hi-Flow Blocks including TDX, Maze4 CPU and GPU and also all Danger Den Reservoirs with 9/16" thread.For more information on Barbs and Fittings please see our Barb Sizes Explained Guide
Danger Den replacement Hi-Flow chrome fittings with 3/8" hose tail can be used with most older Danger Den Hi-Flow Blocks including TDX, Maze4 CPU and GPU and also all Danger Den Reservoirs with 9/16" thread.For more information on Barbs and Fittings please see our Barb Sizes Explained Guide
Edvard König G3/8 to 1/2" Hose Tail Barb - can be used in most G3/8 thread products or as a direct replacement for your EK G3/8 Acetal top and Thermochill Radiators.For more information on Barbs and Fittings please see our Barb Sizes Explained Guide
Edvard König G1/4" to 1/2" Hose Tail Barb - can be used in most G1/4 thread products or as a direct replacement for your EK Blocks.For more information on Barbs and Fittings please see our Barb Sizes Explained Guide
Edvard König G1/4" to 3/8" Hose Tail Barb - can be used in most G1/4 thread products or as a direct replacement for your EK Blocks.For more information on Barbs and Fittings please see our Barb Sizes Explained Guide
Short fitting for 1/2" ID tubing. The fitting spreads out from block surface 12mm. This fitting is ideal for close SLI setup.
Short fitting for 3/8" ID tubing. The fitting spreads out from block surface 12mm. This fitting is ideal for close SLI setup.
Edvard König replacement G1/4" Plug with rubber O ring.For more information on Barbs and Fittings please see our Barb Sizes Explained Guide
