Contains 99.9% pure silver:
Arctic Silver 5 uses three unique shapes and sizes of pure silver particles to maximize particle-to-particle contact area and thermal transfer.

High-Density:
Arctic Silver 5 contains over 88% thermally Conductive filler by weight. In addition to micronized silver, Arctic Silver 5 also contains sub-micron zinc oxide, aluminum oxide and boron nitride particles. These thermally-enhanced ceramic particles improve the compound's performance and long-term stability.

Controlled Triple-Phase Viscosity:
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Silver 5's consistency is engineered for easy application. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability.
(This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)

Not Electrically Conductive:
Arctic Silver 5 was formulated to conduct heat, not electricity.
(While much safer than electrically conductive silver and copper greases, Arctic Silver 5 should be kept away from electrical traces, pins, and leads. While it is not electrically conductive, the compound is very slightly capacitive and could potentially cause problems if it bridges two close-proximity electrical paths.)

Absolute Stability:
Arctic Silver 5 will not separate, run, migrate, or bleed.

The high-density, ceramic-based thermal compound specifically designed for modern high-power CPUs and high-performance heatsinks or water-cooling solutions. The Evolution of Cool!

Features:
High-Density ceramic content:
Céramique uses a high-density layered composite of five unique shapes of thermally conductive aluminum oxide, boron nitride and zinc oxide sub-micron particles to maximize particle-to-particle contact area and thermal transfer. This exclusive combination provides performance exceeding most metal based compounds.

Arctic Silver Thermal Adhesive IS NOT intended to be used between a CPU and the CPU heatsink.
A thermally conductive Epoxy resin which hardens into a PERMANENT bond.

Zalman's new ZM-STG1 thermal grease, gives you the possibility to apply with a brush (which is built in to the top), thus preventing you from getting your hands dirty but also giving you the oppertunity to apply the grease more exact to the heated area.

According to Zalman, this grease has the capacity to lower your temperatures 5° more than other similar products in this range.

This grease is non-curing, thereby making it easier to change coolers, without any damage.

The bottle has 3.5g, enough for 10x applications.

Technical Details:
- Type: non curing
- Capacity: 3.5g
- Specific Gravity: 2.86
- Temperature Stability: -45°C to 150°C (-49°F to 302°F)
- Thermal Conductivity: 4W/mK

Self-adhesive (both-sided) heat conducting pad for fixation of memory coolers or other products.

Technical data:
25.5 x 25.5mm
1 piece

For a better dissipation of the heat between processor and cooler. You should use it for any processor and CPU. The Silver cheap thermal paste is combined silver particles. Thus a better heat transfer is ensured. The syringe suffices for 3-5 applications. Contents: 0,5g.